Panasonic NN-8508 - Page 32

NN-8508, NN-8558
NN-8808, NN-8858
NN-8808P
4.
Auto
Weight
Combination
6.
Auto
Sensor
Cooking
(NN-8808/8858/8808P)
NOTE: Make sure that the outer panel is installed before Auto Sensor
OPERATION
DISPLAY
Cooking Test, since Auto Sensor function does not operate prop-
1.
Tap
Auto
Weight
Cornbination
pad
5
AUTO COMB
erly without the outer panel.
times.
OPERATION DISPLAY
1. Pour 150 + 15cc (4.5 + 1/2 ozs) of
room temperature water in a beaker,
securely cover the top of the beaker
with plastic wrap and place the beak-
er in the center of the oven.
COVER THE TOP OF THE
BEAKER WITH PLASTIC WRAP
2.
Set
the
weight
for
4
pounds
by
tapping
1.0
(tb)
pad
4
times.
AUTO COMB CD »
3. Tap Start pad.
150 + 15¢c
(4.521/2 ozs)
ROOM TEMPERATURE WATER
. Tap Auto Sensor CooK Pad once.
1.
Tap
Auto
Reheat
.
Tap
Start
Pad.
1-Pastry
pad
. 4 times.
2. Tap Start pad. . The humidity sensor detects steam
about 2 to 4 minutes after the Start
Pad is tapped.
Auto Sensor Cooking (T1) automatical-
ly switches to time cooking (T2).
“1” disappears with beep sounds and
the remainder of cooking time
appears in display window.
NOTE: Cooking time will vary de-
pending on the water temper-
ature, the shape of beaker or
the power source voltage.
NOTE: K factor for 1 program Is 2.5.
Please refer to page 14 in de-
tall.
NOTE: If 3 45 to 8 45 appears,
’ AUTO SENSOR FUNCTION
is normal.
. When the balance of cooking time has
elapsed, oven stops and beeps five
times.
*TOD reappears in the display
window.