Panasonic NN-CD550W - Page 22

Memory
This feature allows you to pre-program your oven for regular reheating or cooking tasks. You are
able to pre-program your oven for a specific power level and time that is convenient for you. You
are able to pre-program three memory tasks.
To set a Memory Program
Memory
M
Memory
M
• Press
Memory Pad.
• The oven is automati-
cally pre-set to memory
1. To select memory 2
or 3, turn Auto Menu
Selector Dial clockwise.
• Press Memory Pad to
store this task or press
Start Pad to start cooking
in this sequence.
Program the desired
cooking program.
To use a Memory Program
Memory
M
• Press
Memory Pad.
• The oven is automatically pre-
set to memory 1. To select
memory 2 or 3, turn Auto
Menu Selector Dial clockwise.
• Press Start Pad to
begin cooking.
Start
Note:
1. Auto programs cannot be programmed into memory.
2. Convection pre-heat mode cannot be programmed into memory.
3. Memory can only store 1 stage cooking. It is not possible to store 2 or 3 stage cooking.
4. Setting a new cooking program into memory will cancel the cooking program previously
stored.
5. Memory program will be cancelled if the power supply is off or the plug gets disconnected.
En-22
IP2937_39K60EP_01_Eng_00_100202.22 22IP2937_39K60EP_01_Eng_00_100202.22 22 2010-2-2 Tina14:32:042010-2-2 Tina14:32:04