Panasonic NN-J155WB EPG

Questions and Answers

T
Tracy StarkAug 12, 2025
Why is my Panasonic NN-J155WB EPG sparking?
- A
  Ashley RichardAug 12, 2025
  If your Panasonic Microwave Oven is producing sparks, it may be due to using metallic ware that is touching the oven wall. Do not use metallic ware for cooking unless specified in the cooking guide, and avoid cookware with metallic trimming.
T
Tanya LeeAug 16, 2025
What to do if my Panasonic NN-J155WB EPG Microwave Oven produces little heat?
- K
  Kristin HolmesAug 16, 2025
  If your Panasonic Microwave Oven seems to be operating but produces little heat, it could be due to a power source voltage lower than 90%. It is suggested that you contact your local electric power utility company or a qualified electrician. Also, a defective P.C.B assembly or defective magnetron can cause this issue, requiring replacement.
W
williamsmargaretAug 20, 2025
What to do if my Panasonic NN-J155WB EPG Microwave Oven won't turn on at all?
- S
  Sharon BryantAug 20, 2025
  If your Panasonic Microwave Oven does not operate, and the display window shows no figures, and no input is accepted, the monitor switch may be malfunctioning, the fuse may have blown, the high voltage capacitor may be defective, or the magnetron thermostat may be defective. Replacement of the monitor and primary switches, the fuse, the high voltage capacitor, or the magnetron thermostat may be required.
C
chambersconnieAug 23, 2025
What to do if my Panasonic Microwave Oven display is on, but it won't start?
- J
  Juan GriffithAug 25, 2025
  If your Panasonic Microwave Oven's display shows all figures set, but the oven doesn't start cooking when the START pad is touched, this may be caused by a defective secondary switch or a defective P.C.B assembly, requiring replacement.
J
James BarrAug 27, 2025
Why is the output power too low on my Panasonic NN-J155WB EPG Microwave Oven?
- H
  Holly Valdez DVMAug 27, 2025
  If your Panasonic Microwave Oven is not producing enough power, ensure that you are using it with adequate line voltage. Also, it is possible that the food should be cooked for a longer time period, and this may not be a defect.
J
jimenezericAug 31, 2025
Why does the turntable in my Panasonic NN-J155WB EPG Microwave Oven drag or make noise?
- J
  James AndersonAug 31, 2025
  If your Panasonic Microwave Oven's turntable drags or makes noise, it may be due to excessive weight or an imbalance on the tray. Distribute the food evenly, cook smaller portions, and/or use lighter weight cookware.
C
Carol YoderSep 3, 2025
Why is there no microwave oscillation in my Panasonic NN-J155WB EPG?
- Q
  qcherrySep 4, 2025
  If your Panasonic Microwave Oven lamp and fan motor run, and the display operates properly, but there is no microwave oscillation, this could be due to a defective P.C.B assembly, a defective high voltage capacitor, or a defective magnetron. Replacement of the P.C.B assembly, the high voltage capacitor, or the magnetron may be required.
A
Alexis PayneSep 8, 2025
Why does my Panasonic NN-J155WB EPG only work on high?
- M
  Michael MartinezSep 8, 2025
  If your Panasonic Microwave Oven does not cook properly when programmed for the set power level, but operates properly on HIGH, this may be caused by a defective P.C.B. assembly, requiring replacement.