Panasonic NN-J993 - Antenna Motor; Convection Fan Motor

8.9. Antenna motor
1. Follow inverter PCB removing steps 1-16 first.
2. Unplug connector.
3. Remove screws.
8.10. Convection fan motor
1. Remove frame.
2. Remove cabinet.
3. Remove back panel.
4. Remove back panel (inner) (11 screws).
5. Remove fan blade (M4 nut + spring washer).
6. Remove IR sensor.
7. Remove barcket.
a. Remove lead wire connector.
8. Remove cooling fan.
9. Remove motor.
24
NN-J993