10
Beep Sound:
When a pad is pressed correctly, a beep will be heard.
If a pad is pressed and no beep is heard, the unit did not or cannot accept the instruction.
When operating, the oven will beep twice between programmed stages. At the end of any
complete program, the oven will beep 5 times.
Note:
If no operation after cooking program setting, 6 minutes later, the oven will automatically
cancel the cooking program. The display will return to clock or colon display.
Sensor Reheat Button
(☛ page 16)
Popcorn Button
(☛ page 13)
Timer Pad
(☛ page 19)
Quick Min Pad
(☛ page 12)
Power Level Pad
(☛ page 12)
Stop/Reset Button
Number Pads
Sensor Cook Button
(☛ page 16)
Keep Warm Pad
(☛ page 12)
Less Pad (☛ page 13)
More Pad (☛ page 13)
Clock Pad
(☛ page 11)
Inverter Turbo Defrost
Pad (☛ page 14)
Display Window
Start Button
Before cooking: One tap
clears all your instructions.
During cooking: One tap
temporarily stops the cooking
process. Another tap cancels
all your instructions, and time
of day or colon appears in the
Display Window.
After cooking program
setting, one tap allows
oven to begin functioning.
If door is opened or
Stop/Reset Button is
pressed once during oven
operation, Start Button
must be pressed again to
restart oven.
Control Panel
IP1801_38W70AP_24_091223 2009.12.23 10:31 Page 12
To Next Page
Loading...
