5
2. OPERATION AND DIGITAL PROGRAMMER CIRCUIT TEST PROCEDURE
Operation guide on the display.
To assist in programming, the next operation will appear on the display. When you are used to operating the oven, you can turn the
operating guide off.
To turn off: To turn on:
Press 3 times Press 3 times
1. SET CLOCK
2. MICROWAVE COOKING - 2 STAGE
3. AUTO WEIGHT DEFROST
OPERATING GUIDE OFF
OPERATING GUIDE ON
OPERATION DISPLAY
1. Plug the power supply cord
into the wall outlet
WELCOME TO PANASONIC. REFER
TO OPERATING INSTRUCTIONS
2. Press clock pad
SET TIME
3. Enter time of day
4. Press clock
11:25
OPERATION DISPLAY
1. Place water load in oven
2. Press Micro Power once to
set High Power
HIGH
SET TIME
3. Set time at 5 sec by pressing
1 sec pad 5 times
4. Press Micro Power pad 3
times to set Medium Power
5. Set for 1 minute by pressing
1min pad once
Once
Once
Twice
5 Times
11
PRESS CLOCK
25
5 Times
5 SEC
PRESS START
HIGH
SET TIME
MEDIUM
Once
PRESS START
MIN SEC
100
MEDIUM
6. Press start pad
7. When 1st stage cooking has
elapsed oven automatically
switches to 2nd stage
8. When 2nd stage cooking has
elapsed oven beeps 5 times
and shuts off
OPEN DOOR
OPERATION DISPLAY
1. Select desired program
MEAT ITEMS
SET WEIGHT
2. Press g or lb and oz
LB OZ
MEAT ITEMS
SET WEIGHT
3. Enter the weight by pressing
up and down pads
1LB OZ
PRESS START
4. Press start pad
OPERATION DISPLAY
5
SEC
MIN SEC
100
* *
* *
To Next Page
Loading...
