NR-A191G, NR-A191GW, NR-A191GS, NR-A221G, NR-A221D, NR-A221DS, NR-A251D
8
3 Disassembly Instruction for Water Dispenser
4 Disassembly Instruction for Evaporator
O Water dispenser disassembly
- Remove the water dispenser case.
(unlock the water dispenser case at bottom side by
the minus screwdriver) Fig. 1
- Push the water dispenser upward to remove.
- Remove the pin locate at the lever water dispenser.
Fig. 2 Fig. 1
Fig. 2
- Remove the screws of main pipe (2 Pcs) Fig. 3
To replace the water dispenser
- Be sure to set the water dispenser lever should be
locate in place.
- Be carefully the lib of water dispenser case and
water dispenser escutcheon are broken. Fig. 3
O Evaporator disassembly
- Remove the evapoator door
- Remove the screw of evapoator cover (2 Pcs) Fig. 4
(only model NR-A221D, NR-A221DS and NR-A251D)
- Remove the screw of evapoator trim (4 Pcs) Fig. 5
- Unlock between evaporator and trim, then pull the
trim toward you to remove carefully. Fig. 4
Fig. 5
- Replace the damage parts in the thermostat case,
the parts assembly evaporator portion as;
1. Evaporator 5. Thermostat Dial
2. Evaporator Trim 6. Defrost Button
3. Door Switch 7. Lamp
4. Thermostat 8. Lamp Socket Regulation Control Non-Regulation Control
To replace the evaporator
Fig. 6 Fig. 7
- Be sure to set above parts should be locate in place.
- Be carefully the lib of evaporator trim for lock with evaporator are broken.