EasyManua.ls Logo

Panasonic NR-B53VW2 - Safety Instructions; General Safety Warnings and Precautions

Panasonic NR-B53VW2
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
English
Introduction
WARNING
Indicates risk of death or serious injury.
WARNING: Do not use mechanical devices or other means to accelerate the
defrosting process, other than those recommended by the manufacturer.
● This can cause damage to the interior of the refrigerator or cause an explosion.
WARNING: Do not damage the refrigerant circuit.
WARNING: Do not use electrical appliances inside the food storage
compartments of the appliance, unless they are of the type recommended by
the manufacturer.
Do not store volatile or ammable substances in the refrigerator.
● Flammable substances such as benzene, thinners, alcohol, ether and Liquid
Petroleum Gas (LPG) can cause explosions.
WARNING: Keep ventilation openings, in the appliance enclosure or in the
built-in structure, clear of obstruction.
● The refrigerant (R600a) used in the refrigerator and the gases in the insulation
material (cyclopentane) are both ammable. They also require special disposal
procedures.
● Before you dispose of the appliance, make sure none of the pipes on the back
are damaged. Refrigerant or gas leaks can cause re or explosion.
WARNING: Connect potable water supply only.
The new hose – sets supplied with the appliance are to be used and that old
hose – sets should not be reused.
The ice maker in refrigerator must be installed only by the manufacture or its
service agent except ice storage box.
● Ice maker type : EAU37119711, EAU37119712
Make sure the supply cord and plug are not squashed or damaged.
● A damaged power plug or cord can cause short-circuit, re or electric shock.
● If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualied persons in order to avoid a hazard.
● DO NOT ATTEMPT TO REPLACE IT YOURSELF.
If LED or LED cover is damaged or if anything appears questionable, contact
your dealer or an authorized service centre.
● Do not attempt to repair, replace or disassemble any damaged parts, etc.
yourself.