Prime Fresh+
When “Prime Fresh+” is set, the Prime Fresh case will reduce the temperature quickly for
better performance of preserving food.
How to operate the “Prime Fresh+” mode
Light is on: Prime Fresh+
is operated .
Light is o: Prime Fresh+
is not operated.
●Press the “Prime Fresh+” icon twice to start
Prime Fresh+. Then, the light above the “Prime Fresh+”
icon will turn on.
●If you want to stop the Prime Fresh+ operation
immediately, press the “Prime Fresh+” icon until the light
turns o.
Remark
● “Prime Fresh+” will stop automatically after running for 105 minutes (when the ambient
temperature is 18 °C or less) or between 145 ~ 150 minutes (when the ambient
temperature is higher than 18 °C) and return to normal mode.
(The light LED [Prime Fresh+]
turns o.)
● The flashing of light LED [Prime Fresh+] means that the defrosting system is currently
working. “Prime Fresh+” will start right after the defrosting operation is nished.
● The temperature of the Prime Fresh case will return to its previous setting when
“Prime Fresh+” ends.
● The following modes will be stopped when Prime Fresh+ is turned on:
With CW530H: Quick Ice/Freezing, Prime Freeze.
With CW530J: Quick Freezing, Quick Ice Making, Prime Freeze.
● “Prime Fresh+”
will not start when the temperature of the Prime Fresh case is being set
between 4 °C ~ 0 °C.
28
To Next Page
Loading...
