Panasonic NT-DP1

9
Parts Names and Handling Instructions
Size of bread
8~13 cm
8~12 cm
Thickness:
1~2 cm
Insert the bread with the longer side facing down. •
If the bread is too large, thick, thin or bread with uneven surfaces, it may get •
jammed or caught inside of the toaster.
If the bread is too small, it may get caught inside of the toaster or pop it up. •
If bread gets jammed, unplug the toaster, let it cool, and carefully remove the •
bread. Otherwise it will keep toasting. Don’t use anything sharp to remove the
bread, you’ll damage the heating elements.
Note
When using the toaster for the first time, there may be a small amount some smoke or smell. This will disappear
●
with usage.
The illustrations inside mainly show model NT-ZP1.
Please remove the protection seals from the appliance before use.
Browning level
indicator
Browning control
button
NT-ZP1 NT-DP1
Defrost button
Reheat button
Stop button
Toast lever
Warming rack lever
Insertion slot
Crumb tray
Slide out to remove.
●
Mains lead
Warming rack
Browning level
indicator (For NT-ZP1)
Defrost indicator
(For NT-ZP1)
Reheat indicator
(For NT-ZP1)
Mains plug
* The shape of the mains
plug may be different
from illustration.
Cord storage
Store the mains lead
●
as illustrated. Do not
set the mains lead in
the opposite direction.
Before you store the
mains lead, clean the
toaster as crums may
spill out. (P.12)
Before using the toaster,
●
adjust the length of the mains
lead in these places.
Electrical Requirement / Parts Names and Handling Instructions