Panasonic NV-RZ2EN - Error Code Display

- The Service Information is displayed on the EVF and LCD monitor.
(There are 4 kinds of SERVICE MODES as shown below.) In the
OSD Line Output Mode, the service Information can be also
displayed on the TV.
MODE NAME FUNCTION How to use. (Push the following keys
simultaneously
more than 2 sec.)
OSD Line Output
MODE
-Checking the EVF information on
the TV monitor.
FOCUS/SET
<SIDE CASE(R)>
STOP
<TOP PANEL>
DATE
<
SIDE
TOP>
MODE NAME FUNCTION How to use. (Push following keys
simultaneously
than 2 sec.)
SERVICE MODE 1
-Remaining Battery A/D Value.
-Safety Device.
-Capstan/Cylinder injuctions.
COLOUR
<SIDE CASE(R)>
STOP
<TOP PANEL>
DATE
<
SIDE
TOP>
MODE NAME FUNCTION How to use. (After chosing SERVICE MODE 1,
Push
[DATE/TITLE] key.
SERVICE MODE 2
-Reference Voltage A/D Value.
-Mechanism positio.n
-Serial key code.
DATE/TITLE
MODE NAME FUNCTION How to use. (After chosing SERVICE MODE 2,
Push
[DATA/TITLE] key.
SERVICE MODE 3
-ERROR CODE Display.
DATE/TITLE
MODE NAME FUNCTION How to use. (After chosing SERVICE MODE 3,
Push
[DATE/TITLE] key.
SERVICE MODE 4
-PG SHIFTER ADJUSTMENT.
DATE/TITLE
3.2. ERROR CODE DISPLAY
- When an undesirable condition occurs, the power will be turned
off. (Except zoom & focus motor lock condition. Since this model,
“ERROR CODE” is not automatically displayed on the EVF and
LCD monitor, also the CAMERA LED is not flashed.)
- By turning on Service Mode 3, it is possible to check what kind of
undesirale condition has occurred, even after the ERROR CODE
has disappeared. (The ERROR CODE is stored with EEPROM-IC.)
NOTE1:
The content of all Service Modes (Service Mode 1-Service Mode 4) is the privious models.
So, please refer to the following Technical Information for the details.
Order Number for Technical Information : VMD9512M138
NOTE2:
Since Service Mode 3 (ERROR CODE display) is important for the service, the outline is shown
6