three pin plug, marked with the letter E or the Earth Symbol.
2.4.2.2. Before use
remove the Connector Cover as follows.
2.4.2.3. How to replace the Fuse
1. Remove the Fuse Cover with a screwdriver.
2. Replace the fuse and attach the Fuse cover.
3. SERVICE INFORMATION
3.1. SERVICE INFORMATION DISPLAY (GENERAL DESCRIPTION)
- This Movie Camera has SERVICE INFORMATION DISPLAY function
which enables quick trouble-shooting.
- The Service Information Display is available with the following
prcedures.
- The Service Information is displayed on the EVF and LCD monitor.
(There are 4 kinds of SERVICE MODES as follow.)
In the OSD Line Output Mode, the service Information can be
displayed even on TV.
7
To Next Page
Loading...
