Panasonic Omnivision PV-8451 - Page 14

One Time VCR Setup
‘Important: If the remote control POWER, ACTION,
PROG, CHA/V, INDEX or ADD/DLT
button does not work when pressed,
press the VCR button on the remote and
try the button again.
1 Press ACTION to
display the menu.
2 Press AT to select
the language.
English: LANGUAGE
Spanish: IDIOMA
French: LANGUE
- MENU -
SET UP VCR
SET UP FEATURE
SET CLOCK
SET UP CHANNEL
ENGL I SH
select!*t key
SET : ► KEY
END :ACT I ON KEY
3 Press ► repeatedly to change the language.
< -1_
SET UP VCR
SET UP FEATURE
SET CLOCK
SET UP CHANNEL
llJUiW.flWKdllStEN;
- MENU -
PREPARAR VCR
F 1JAC 1 ON DE FUNCIOt
FI JAR RELOJ
FI JAR CANAL
—-MENU-
REGLAGE MAGNETOSCOPE
REGLAGE MAGNETO SUPPLEM
REGLAGE HORLOGE
REGLAGE CANAL
SELECT:* * KEY
SET : ► KEY
END :ACT ION KEY
ESF
ELEGIR:* ▼
FI JAR : ►
TERMINAfi:ACTION
IWiMItMMlWBBK franqa i s
SEL. :* T
REGLER:P
FIN : ACT ION
4 Press ACTION to exit this mode.
To Add or Delete a Channel
1 Select a channel using the
NUMBERED keys to add
or CH A/ T to delete.
2 Press ADD/DLT to add
or delete the channel.
• To select a channel
once ifs deleted,
use the NUMBERED keys
on the remote control.
CHANNEL 06 ADOED
CHANNEL 08 DELETED
To Replace Channels in Memory
In case you have cable installed, etc.
1 P ress ACTIO N * to d isplay
the menu.
2 Press AT to select “SET
UP CHANNEL,” and then
press ► to display the
“SET UP CHANNEL" screen.
3 Press AT to select
“ANTENNA," and then
press ► to set your antenna
system (TV or CABLE).
4 Press AT to select “AUTO
SET,” and then press ►
to display the “CHANNEL
CLOCK AUTO SET" screen.
• If you use a cable box, turn
it on and set it to the PBS
channel in your time zone.
• To exit this mode,
press ACTION twice.
5 Press CH A to start
Channel Auto Set.
• Clock Auto Set will be performed when channels are
replaced in memory. To cancel, press STOP when
“AUTO CLOCK SET PROCEEDING” appears on-screen.
To Set or Reset the Clock
In case the clock is wrong, or a power
1 Press ACTION to display
the menu.
2 Press AT to select “SET
CLOCK,” and then press ►
to display the “SET CLOCK”
screen.
3 Press AT to select
“MANUAL,” and then press
► to display the SET
CLOCK screen.
, 4 Press AT and A ► to select
and set the date, time and
DST. (Daylight Saving Time).
5 Press ACTION twice to
start the clock and exit
this mode.
• For Auto Clock Set, select “AUTO CLOCK
SET," and then press CH A in step 3.
failure occurred.
- MENU -
SET UP VCR
ET UP FEATURE
SET UP CHANNEL
Laumu- mouEiBiiGi
.std
SET CLOCK-
AUTO CLOCK SET
SELECT:* ▼ KEY
SET : ► KEY
END :ACTlON KEY
-SET CLOC K^h*-’-*^
D$T:QH\
1/ 4/2000 TUE 12:00?'/
SELECT:* V KEY
SET ► KEY
END :ACT ION KEY
- MENU —
SET UP VCR
SET UP FEATURE
SET CLOCK_
[SET up channel!
IDIOMA/ LANGUE: ENGL I SH
SELECT:* v KEY
SET : ► KEY
END :ACT I ON KEY
- SET UP CHANNEL -
HJIHJIJH : CABLE
AUTO SET
CHANNEL CAPTION
CABLE/OSS BOX SET UP
VCR PIUS+ CH SET UP
SELECT:* V KEY
SET : ► KEY
END :ACT I ON KEY
CHANNEL/CLOCK AUTO SET
CONNECT ANTENNA CABLE
AND IF YOU USE A CABLE
BOX, TUNE IT TO YOUR
LOCAL PBS CH THEN. . .
PLEASE PUSH CH UP KEY
When Using the 100 key
When selecting CABLE channels 100 to 125 with the
NUMBERED keys, first press the 100 key and then
enter the remaining two digits.
For example, to select channel 125:
Press NUMBERED keys 100, then 2, then 5.
• This VCR will accurately maintain its calendar up to Dec. 31,2096,11:59PM.
• Normal TV or Cable channels are automatically selected and placed in memory depending on
how your VCR is hooked up.
14