Panasonic Omnivision PV-8451 - Page 22

Special VCR Features (continued)
‘Important: If the remote control POWER, ACTION, PROG, CHA/V, INDEX or ADD/DLT button does not
work when pressed, press the VCR button on the remote and try the button again.
Sfeheck list before you begin.
□ All connections are made.
(See pages 6-9.)
□ VCR is plugged in.
□ TV is turned on and set to the VCR
channel (CH 3 or 4).
R EC/TIME
VCR Lock Feature
When activated, this feature prohibits all operations except for timer
recording and tape eject. This feature may be used to keep young children
from operating the VCR.
Hold down REC/TIME on the VCR
without a cassette inserted for 7
seconds during Power On mode.
CASSETTE" is displayed when RECfTIME
is pressed. Please disregard this warning
and continue to hold down REC/TIME
for 7 seconds.
To Cancel the VCR Lock feature,
with or without a cassette inserted,
hold down REC/TIME on the
VCR for 7 seconds again while in
Stop mode.
• VCR Lock mode is cancelled automatically
after about 24 hours as long as the clock is set.
Warning Beeper Feature
When you select BEEPER ON, a short warning will sound each time an
invalid entry or incomplete operation is made.
1 Press ACTION* to display the
menu.
2 Press AW to select “SET UP
VCR,” and then press ► to
display the “SET UP VCR” screen.
3 Press AW to select “BEEPER,"
and then press ► to select “ON”
or “OFF.”
4 Press ACTION twice to exit this
screen.
22