Panasonic Omnivision PV-8451 - Page 21

I>/T Check list before you begin.
□ Clock is set to correct time.
Time Stamp Feature
For about the first 10 seconds of each recording, the VCR automatically writes
the following program data on the tape: Date, Start time, Scheduled stop time
{for Timer Rec. only), Channel No. and Category (for Timer Rec. only). Then,
if playback is started at the starting point of the recording, this information will
be displayed about 7 seconds after playback begins for a few seconds.
1 Press ACTION to display the menu.
2 Press AT to select “SET UP
FEATURE,” and then press ► to
display the “SET UP FEATURE” screen.
3 Press ► to select “ON” or “OFF.”
• When “OFP is selected, the program data is
written on the tape, but will not be displayed
for the first 5 seconds of playback.
4 Press ACTION twice to exit.
«Time Stamp Example>
Normal/
One Touch Recording Timer Recordin g When Clock is not set...
12/28/1998 MON
12:00PM- 1:00PM
CH 08 ABC SPORTS
• If the tape speed is changed immediately after recording begins,
the display may be incorrect.
Blue Back ON/OFF Feature
You may choose whether or not you want the VCR to display a solid blue
screen when the broadcast signal is very weak or nonexistent.
9 Press ACTION to display the menu.
b Press AT to select “SET UP
VCR,” and then press ► to
display the “SET UP VCR” screen.
C Press AT to select “NOISY CH
BLUE BACK,” and then press ►
to select “ON” or “OFF.”
* When “ON" is selected, a solid blue screen
appears whenever the signal is weak or
nonexistent. When “OFP is selected, the picture
is displayed regardless of the signal condition.
• The picture can not always be seen clearly when “OFP is selected.
d Press ACTION twice to exit.
21
More
You
Can
Do