Panasonic Omnivision PV-9400 User Manual

*Important: If the remote control POWER, ACTION, PR
TAPE POSITION, or ADD/DLT button d
remote and try the button again.
‘e)
=|
r)
=
Set the clock manually 3
4)
AUTO CLOCK SET 1) Press ACTION <
IS INCOMPLETE 2
SELECT/
PUSH ACTION TO SET CLOCK Oe hay W
v STOP ra
<@qsREW
2) Press A¥ to > FF Bd
select month
3) Press » to set ACTION
SELECT MONTH
aa . ree * Likewise, set date, year, time,
END ACTION KEY DST (Daylight Saving Time)
To Make Corrections,
repeatedly press <P to move to
error, then correct
SET CLOCK
{} 4/2000 TUE 12:00°H eee
(Clock starts }
* For exit this mode,
press ACTION
SET <4» KEY
START ACTION KEY again
t Notes J Model PV-9450 remote is shown here
¢ VCR calender is accurately maintained to
Dec 31, 2096 11 59PM
¢ Channel auto set selects normal TV or Cable
channels depending on your VCR hookup
IMPORTANT NOTE FOR AUTO CLOCK SET
¢ Auto clock set is performed the first time the VCR is turned off each day If used, a cable box must be left on and
tuned to the PBS channel at the time VCR power s turned off if you want auto clock set to be done
* lf used, a DSS receiver must be turned off for auto clock set
¢ If Cable Box or DSS receiver is connected to VCR via Audio/Video jacks, an RF coaxial cable must also be
connected for auto clock set and channel auto set features
Using AV<4P keys
You can also operate the menu screen
using VCR buttons
If you use VCR buttons, press CH & and Ff
CH ¥ together to display the menu screen PAS"
When
menu
screens
are
displayed,
PLAY,
STOP,
REWIND,
and
FF
buttons
function
On
Remote
as
AV<4
>
only

Panasonic Omnivision PV-9400 Specifications

General

Brand	Panasonic
Model	Omnivision PV-9400
Category	VCR
Language	English