Panasonic Omnivision PV-9400 User Manual

REW
Model PV-9450 remote is shown here.
«aD.
@ To prevent tape jam
Inspect your cassette tapes and
remove any loose or peeling labels.
IS cheek list before you begin.
C1 All connections are made.
QC) TV and VCR are plugged in.
CJ TV is turned on and set to the VCR channel (CH 3 or 4).
CJ Remote is in VCR mode.
Insert a cassette.
e VCR power comes on and VCR ;
appears on display.
Press PLAY.
* Playback begins if cassette has
no record tab.
Wi To Find a Particular Scene
’ Forward Search --> Press FF.
Reverse Search --> Press REW.
@ For Slow Motion --> Press SLOW.
(To release, press SLOW.)
@ For Still (Freeze) picture --> Press PAUSE.
(To release, press PAUSE.)
@ For Frame by Frame picture --> Press SLOW in Still mode.
(To release, press PAUSE.)
Cusp * To reduce picture noise, see “Manual Tracking Control” on
page 31.
* After the VCR is in Still or Slow mode for 3 minutes, it will switch to
Stop mode automatically to protect the tape and the video head.
Hi To stop --> Press STOP.
Mi To rewind tape --> Press REW in: Stop mode.
Wi To eject tape --> Press EJECT on the remote or
STOP/ EJECT on the VCR.
Playback using VCR controls
1 Insert a cassette.
2 Press PLAY.
Press to stop and/ or eject tape.
For assistance, call 1-800-211-PANA(7262).

Panasonic Omnivision PV-9400 Specifications

General

Brand	Panasonic
Model	Omnivision PV-9400
Category	VCR
Language	English