Panasonic Omnivision PV-9450

“Important: If the remote contro!) POWER. ACTION, PROG, CH4/¥, INDEX, NUMBERED keys, INPUT,
TAPE POSITION, or ADD/DLT button does not work when pressed, press the VCR button on the
remote and try the button again.
When set to proper audio mode VCR can:
1) record/playback MTS stereo broadcasts (main language) in Hi-Fi stereo.
2) record/playback mono (main language) or SAP (sub language) broadcasts.
3) playback non Hi-Fi tapes in monaural.
¢ The selected broadcast sound is always recorded on left and right Hi-Fi track as well as the norma! monaural
track. This means tapes can be played back on Hi-Fi and non-Hi-Fi VCRs.
zy
PANS
TolComiti(ole(=m
ela
at-rere)
cel
lare|
‘Display audio mode.
Press SAP/ Hi-Fi.
SAP/Hi-Fi
Select desired mode.
Press SAP/ Hi-Fi
SAPHi-Fi | repeatedly (each
press within 5
seconds).
* Refer to the “Receivable
The anser indienne: Broadcast Types” on page 20.
your selection.
Do a recording.
See page 9.
Wa}SAS 0a13}S 4-H SHAASeSpeOlg SLIN
Audio Mode for Playback
Start playback.
See page 8.
Display audio mode.
SAP/HIi-Fi
Press SAP/ HI-Fi.
* Only tapes recorded in Hi-Fi stereo
Select desired mode. will play back with true stereo sound.
Standard stereo tapes will Bey, back
Press SAP/ Hi-Fi in monaura! sound.
SAPIHi-Fi repeatedly (each * To listen to Hi-Fi stereo layoack the
press within 5 VCR AUDIO (L/R) jacks must be
connected to a stereo FV or an
seconds). external stereo amp and speakers.
(See page 20.)
. SHIFI(RY" to listen acd or * If tracking is adjusted during playback,
*
The
arrow
indicates
-
recordings
in
stereo
sound.
Hi-Fi
audio
may
revert
to
normal
audio.
your selection. Select “NORMAL” for monaural * Hi-Fi and normal audio playback
sound. volume ieve! may differ.
21