Panasonic Omnivision PV-9450

Special VCR Features
Tape Position Display Feature
To find out the present tape position.
Tape position cannot be found for C-Cassette type and tape
of less than 60 minutes.
1 ee ene
DETECTING TAPE POSITION |
% « Indication is standard.
Detect Tape Position.
Press TAPE POSITION."
* Detecting tape position is only
when first cassette in.
* It takes several! seconds for
correct indication to appear.
¥
BEGIN ENO
‘Return to normal
screen
Press TAPE POSITION.
Remote Warning ON/OFF Feature
If Multi-brand feature is used (page 14),and this feature is set to on, a warning
appears whenever an invalid key is pressed in TV, DSS, or Cable mode.
b SET UP VCR
SET UP FEATURE
Display menu.
Press ACTION.
Display SET UP VCR.
1) Press A¥ to
select.
SET
CLOCK
:
TDIOMA/LANGUE
GLIS
2)
Press
®
to
IDIOMA
ENGL!
SH
d
i
SELECT:
4 ¥
display.
SET > ex
C SET UP VCR
REPEAT PLAY
TIME STAMP
REMOTE WARNING
1) Press A¥V to
; select.
AUTO SHUT-OFF
SELECT: ¥ KEY
SET 7» KEY
END :ACTION KEY
ms
" --> remote warning will
not appear even if
invalid ee Sat eae ine. OS Pte is pressed.
|. J Returntonormal > to normal
screen.
Press ACTION twice.
IA check list before you begin.
C All connections are made. (See pages 4~5.)
D0 VCR is plugged in.
[J TV is turned on and set to the VCR channel
(CH 3 or 4).
}
2 E2058
REC
SELECT/
b SET
- A:PLAY
Vv :STOP
> :FF
Gi ACTION
d
{
~ TAPE
? POSITION
Model PV-9450
remote is
shown here.
VCR Lock Feature |
All operations are prohibited except timer
recording and tape eject. Useful for families with
small children.
To turn ON:
in Stop mode
hold: down REC on
the VCR without a
cassette inserted
for 7 seconds.
To turn OFF:
Repeat above.
VCR LOCK ACTIVATED
VCR LOCK OFF
e VCR Lock is canceled automatically after 24
hours if clock is set.
For assistance, call 1-800-211-PANA(7262).