Panasonic Omnivision PV-9450

*Important: If the remote contro! POWER, ACTION, PROG, CH4/¥, INDEX, NUMBERED keys, INPUT,
TAPE POSITION, or ADD/DLT button does not work when pressed, press the VCR button on the
cctasler(curstare me (sam talcm elejicolame-(e lc lian
Weak Signal Display ON/OFF Feature
When “on” is selected, picture is displayed even when broadcast
signal is weak or nonexistent.
1 Display menu.
Press ACTION.
? SET UP VCR
SET UP FEATURE
Display SET UP CHANNEL.
“]1) Press A¥ to
ser CLOCK select.
ET UP CHANNEL
1D |OMA/ LANGUE: ENGL SH ;|2) Press ® to
SELECT:4 ¥ KEY display.
SET m» KEY :
---- SET UP CHANNEL ----] Set ON or OFF.
SELECT/
ANTENNA : CABLE 2 SET
1) Press AV to
cuatust ect
HANN
APT
ION
select.
A:PLAY
WEAK SIGNAL D{SPLAY Mxelag : :
} |2) Press & to set. * W:STOP
> :FF
SELECT: ¥ KEY
SET :» KEY
¢ ON --> Picture is displayed regardless of signal condition, and
may not always be clearly visible. — 1 ACTION
OFF -->Screen turns solid blue when signal is absent or weak, .
* If VCR is connected to equipment which has blue back feature,
selecting ON will have no effect on the other equipment.
Return to normal
4 screen.
Press ACTION twice.’
Auto Shut-Off Feature
When “ON’ is selected, VCR shuts itself off wnen playback of a blank
portion of tape continues or no signal is detected for over 5 minutes.
soinjea4 HDA jeloeds
O-f
Repeat step “a” and “b” on page 26 to
display SET UP VCR.
Model PV-9450 remote is shown here.
.. {1) Press.A¥F to
or | select.
</7 |2) Press P to set.
REPEAT PLAY
j b SET UP VCR Set ON or OFF.
AUTO SHUT-OFF
SELECT: 4 ¥ KEY
SET ‘> KEY
END :ACTION KEY
Return to normal
C screen.
Press ACTION twice.
27