file:///E:/PV-9661_PV-9662/SVC/s0401020203.html
9. Check and/or repair the unit.
10. Press the STOP/EJECT button to eject the cassette.
Note:
When inserting a cassette again, remove the jumper between TP6001 and GND and insert the
cassette. Then, reconnect the jumper.
11. After servicing, remove the jumper between TP6001 and GND to release the unit from Service
Mode.
Fig. 2-7
CAUTION:
HOT CIRCUIT (Primary circuit) exists on the Main C.B.A. Use extreme care to prevent accidental
shock when servicing.
Note:
When disassembling/assembling, "CABINET SECTION" in Disassembly/Assembly Procedures.
To Next Page
Loading...
