Cancel a Timer Recording:
(Recording is in progress)
Holddown STOP for a few
seconds to cancel the Timer
Recording.
• Any future daily or weekly recordings
will be performed as programmed.
Repeat steps I and 2 on page 22,
Press AV to select the
desired program.
SELECT/SET
• :CH UP
• :CH DOWN
• :VOL UP
• :VOL DOWN
To Replace program...
1) Press • to display.
2) Press _I,V to select and
press • or •to set new
program contents.
3) Press PROG.
To Clear program...
PressADD/DLT.
Press PROG twice to exit this mode.
• 2 minutes before Timer recording is performed, "PLEASE
PREPARE FOR TIMER REC _appears and/or the PROG
TIMER Indicator flashes. Be sure a cassette with record tab is
loaded and the unit is in Stop mode.
• If the start times of two programs overlap, the lower numbered
program will have priority.
• If the start time for a Timer Recording comes up during a
normal recording or One Touch Recording (page t2), the Timer
Recording will not be performed.
• If there is a power interruption of more than one minute, the
recording may not be performed or continued.
• If "INCOMPLETE" appears after all items have been set, check
all entries and make necessary corrections.
To Next Page
Loading...
