Auto Shut Off
No broadcast signal in TV (Only when
Weak Signal Display is set to OFF),
blank tape is Played for 5 minutes
Power turns off
• This feature is canceled if any button is
pressed during above mode.
• Auto Playback
Insert a tape in Power off mode
Power turns on
• Playback begins if tape has no record tab.
• Auto Rewind
Tape reaches its end
--_ Rewind --_Stop
• Playback Auto Eject (Repeat Play is "OFF")
Tape with no record tab reaches its end
Rewind --* Stop _ Eject
|0@@@
0®@0
00
TAPE
POSITION
To find out present tape position.
Tape position is displayed for VHS-C Cassettes
type, tapes under 30 minutes, end some other
tapes, but the position is not correct.
Press TAPE POSITION to detect current tape
position.
• "DETECTING TAPE
POSITION" only appears the
first time a cassette is inserted
and it takes several seconds
for correct indication to appear.
• The present tape position
indication is displayed.
J
Press TAPE POSITION (or wait 5 seconds)
to return to the normal screen.
To Next Page
Loading...
