Panasonic Omnivision PV-C1331W

Imer Recoraing
You can set up to 8 programs to be recorded while Wr eady Check List
you are away.
[) All connections are made.
Press PROG QO) Your unit is plugged in.
to
display
SET
PROGRAM
screen.
C)
The
clock
is
set
to
correct
time.
Ci The tape is long enough.
1) Press AY to select UJ The record tab is in place.
TIMER PROGRAMMING.
2) Press P to display
screen.
¢ Ifa program is already in
memory, press AY, and
> to select an unused
program number.
Press AV to select ©
and or < to set
the recording DATE.
* 1~31 = One time
« DAILY = MON~FRI
* WEEKLY SUN~SAT
= Same time once a week
EXAM
ple
pm
geecseenigyee
j
—
Dosen
s—)
PROG
TIMER
Indicator
Today's 7 SELECTA/Y Selection Order DAILY
Date LL weeay WEEKLY __ WEEKLY
(SAT) {MON) (SUN)
Repeat step 3 to set:
¢ start time, stop time
¢ Channel (or LINE for outside source)
¢ Category [N/A (not applicable), SPORTS, MOVIE,
COMEDY, MUSIC, DRAMA]
* Speed (SP, LP, SLP)
Timer Recording Using
unit Buttons
You can set a Timer Recording
using ACTION key on the unit.
(See page 13.)
Press PROG
(or ACTION) to end
the program.
To Enter More Programs
ma) Press AV to select and
> to set a blank program
number, and then repeat| ‘] Press STOP/EJECT and REW
step 3. together without a tape inserted
to display MAIN MENU.
Press PROG twice (or ACTION) 2 Press AV + - to select “VCR
to exit this mode. and STOP/EJECT and REW
, . together to display SET UP
¢ If you're using a cable box, make VCR screen.
sure that it is tuned to the desired channel
and the power is left on for timer recording. | 3 eps aie anes
PROG TIMER indicator lights on the unit. the TIMER PROGRAM screen.
4} Repeat main steps 3 ~ 5.
22
For
assistance.
please
call
;
1-800-211-PANA(7262)
or
send
e-mail
to
:
consumerproducts@panasonic.com
fh