Panasonic Omnivision PV-C1331W

Cancel a Timer Recording: Review, Replace or Clear Program
(Recording is in progress) | [@eCiiCee(swelcellatem cuare) lak eeere (2)
Hold down STOP for a few seconds
to cancel the Timer Recording. 1 Repeat steps 1 and 2 on page 22.
* Any future daily or weekly recordings
ilies peronned 44 proaemned P, roe eaoacrs| Press AV to select
Rae Sav = ‘ : soaks
sel the desired program.
3 To hi asta program...
1) Press P to display.
2) Press AV to select
and press < or >
to set new program
contents.
3) Press PROG
(or ACTION).
To Clear ba Hail ut
ADD/DLT
SELECT/
SET
>:VOL UP
€:VOL DOWN
PROG
uoneiedeO Jaw]
Press PROG twice (or ACTION) to exit
this mode.
cz
e 2 minutes before Timer recording is performed,
“PLEASE PREPARE FOR TIMER REC” appears
and/or the PROG TIMER Indicator flashes.
Be sure a cassette with record tab is loaded and the
unit is in Stop mode.
¢ If the start times of two programs overlap, the lower
numbered program will have priority.
* If the start time for a Timer Recording comes up
during a normal recording or One Touch Recording
(page 14), the Timer Recording will not be
performed.
¢ If there is a power interruption of more than one
minute, the recording may not be performed or
continued.
* If “INCOMPLETE” appears after all items have been
set, check ail entries and make necessary
corrections.
23