• Unit --) Decoder withDolby Digital (AC-3)-) Amplifier --) Speaker
or
dts (digital theater systems)
When DVDs recorded in Dolby Digital or dts are played, Dolby Digital bitstream or dts bitstream isoutput
from the unit OPTICAL digital audio output connector or COAXIAL digital audio output connector. When the
unit is connected to a Dolby Digital decoder or dts decoder, you can enjoy theater-quality audio in your
home. [An optical digital audio cable or coaxial audio cable (both optional) is required when an optional
Dolby Digital decoder or dts decoder is used.]
Notes on connecting
an optical digital audio
cable (opt'_nal)
• Removedustprotectioncap from
opticaldigitalaudiooutput.Firmly
cormectthe cabk_to thecon_ctor.
• Alwaysreattach_qedustprotection
capwhenconnectorisnotin use.
unit
Dustprotection
cap
Caution for
optlcal/coaxlei digital
audio output connector:
• When connecting an
amplifier (with an optical/
coexist digital Input
connector) which does not
cordatnthe Dolby Digital
(AC=3)or dm decoder, be
sure to select =PCM" at
"Dolby Digital" end "OFF"
at "tits" ofthe DVD Initial
settlng "DIGITAL AUDIO
OUW'UT"(Seepages2).
• Otherwise any attempt to
DVDs may cause such
a h_h k.-J_ o4 nolse that tt
may be harmful to your ears
and damage your speakerS.
• When a dts decoder I_,,
connected, please select
=Bltatream" st "dto" ofthe
DVD Initial setting "DIGITAL
AUDIOOUTPUT". If "OFF" Is
selected, there will be no
sound (See page 52),
• VideoCDs endCDs canbe
playedas normal.
Note:
• Some (:itsdecoders which do
not suppod DVD-dts interfase
m_,ynot work propedy _ the u_it.
Amplifier
Front
speaker
(Left)
Subwoofer
Surround speaker
(Left)
Coaxial audio cable
(optional}
Decoder with Dolby Digital
(AC-3)/dts processing (optional)
Center
speaker
Front speaker
(Right)
Surround speaker
(Right)
11
To Next Page
Loading...
