_L
When the unit is turned on the first time, setup
mode is entered automatically,
_ Press POWER on
the remote or unit.
2
CHANNEL/CLOCK /¢rro SET
IFY(_J USEACABLE BOX,
*_NE I T TO yO_ LOCAL FI_ C_
THEN,**
_E PIl_l_ UPKF¢
!
Start Channel Auto
Set and Clock Auto
Set.
(_1 Press CH •.
NJTO SET P_ING
O2
I
(Setup completed)
]Pre,scH,tOex.t.
• If the displayed
time and DST
12124/1_ FRI12:00PMOFF are not correct,
pleasedo "To
s_'wl_ : c_o Setor Resetthe
*urncu0_ _-r cou_=_ Clock" stepson
the nextpage
and select
"MANUAL."
_ (Setup incomplete)
Set the clock
manually.
Press ACTION
and do "To Set
or Reset the
Clock" step D on
the next page.
12
1
POWER
2
UP
IMPORTANTNOTE FOR AUTO CLOCK SET
• Auto clock set is padorrned the first
time when the unit is tumed off each
day. It used, a cable box must be left
on and tuned to the PBS channel at
the time the unit power is turned off it
you want auto clock set to be done.
If using, a DSS receiver, it must be
turned off for auto clock set.
If Cable Box or DSS receiver is
connected to the unit via Audio/Video
Jacks, an RF coaxial cable must also
be connected for auto clock set and
channel auto set features.
If, for any reason, the time is changed
manually, automatic time correction
will not occur.
. °|li] dfc.k'f_'l k"lt'JIIZe[=,JKel_l I IDlt llll_ll l "./-q i_I!YIW_;_.I
To Next Page
Loading...
