• To Find a Particular Scene
Rapid Advance -->
Press FF in play mode
Rapid Reverse --->
Press REW in play mode
(To release, press PLAY)
• Sounds are heard during rapid advance at speed 1.
(Noise <static> may be heard on DVDs recorded in LPCM
format.)
• Starting rapid advance (reverse) during play started from
menu on Video COs may recall menu.
• The speed of advance (reverse), slow at first, increases
with each additional press of the button up to 5 levels.
• To Skip a Chapter/Track
Skipping Ahead --)
Press SKIP _•1 during play
Each press skips a chapter (DVD) or track (Video CD/CD).
Skipping Back ...)
Press 1<1'4SKIP during play
Pressing once midway through a chapter/track retums to
start of that chapter/track. Each additional press skips back
one chaptar/tmck.
• Pressing SKIP )'l_i or J<l<l dudng play started from
menu on Video CDs may recall menu.
Current playback position
Skipping Back -<-----_- Skipping Ahead
• To view Still Picture (Pause)
Press PAUSE during play
(To release, press PLAY)
• DVD/Vldeo CD :The unit will enter still picture mode,
• CD :The unit will enter pause mode.
• To view Frame by Frame Advance
(DVD/Video CD)
Each button press advances picture one frame,
Press PAUSE in still mode
(To resume normal play , press PLAY)
• Hold button down for consecutive frame advance.
•• Whether pictures ere advanced by "frame" or "field" is
selected automatically.
• When _ appears on the screen while a button is
being operated, it means that the corresponding
operation is prohibited by the unit or the disc.
The unit memorizes the point where STOP is
pressed( • flasheson screen).
Press PLAY to resume play from this point.
Pressing STOP again or opening the tray
cancels RESUME.
It is not canceled when power is turned off and
on.
• RESUME works only with discs for which elapsed
play time is displayed during play.
Powerturnsoffafterunithas been instop
mode(DVD) for about5 minutes.
1.Do steps1-4 (previouspage). When menu
appears,pressSTOP.
2.Press NUMBERED key(s) to select desired
track (play begins).
• Check disc for track numbers.
• Press =1" to start at beginning of disc.
To resume menu use
PressSTOP, and then MENU. Now,go to step 5
(previouspage).
• To view Slow Motion
(DVD/Video CD)
Press SLOW+ or SLOW- in still mode
(TO release, press PLAY)
• Slow motion speed, slow at first, is increased with each
additional press of the button up to 5 levels.
• For Video CDs, reverse slow motion is not available.
• Please read the disc jacket for operation information.
• Remove disc and press unit POWER off when not in
use.
• Disc continues to rotate with menu displayed even
after play is done. press STOP to clear menu displey
when finished with menu.
• If a single aided disc is placed in upside down,
=PLEASE CHECK THE TYPE OF DISCS, AND
STAIN OR SCRATCH OF A DiSC =is displayed.
19
To Next Page
Loading...
