Youcan set upto 8 programstobe recordedwhileyouare away.
I Display PROGRAM screen.
1 _ Press PROG.
2
@
VC,R pl_, PROGRAM
ON "t tMER
SLEEP T_MER
CO
Select TIMER PROGRAM.
1) Press A,
to select.
2) Press SET to
display.
_i_Check list before you begin.
[] Allconnectionsare made (See page g.)
[] Yourunit is pluggedin.
[] The clockisset to correcttime.
[] The tape is long enough,
[] The recordtab isin place.
f
J
r
I
3
4
2O
• If a programisalready inmemory,
pressAY, and SET to selectan
unusedprogramnumber.
Set the recording DATE.
1) Press AY
@ to select.
2) Press SET (or
4 ) to set.
• 1-31 = One time
• DALLY= MON~FRI
• WEEKLY SUN-SAT
= Same timeonce a
week
Example t,_8_ 9........ 31_ 1 _ 2 ......
6"_',_
!
Today's-- 7 SELECTA/T SelectionOrder DNLY
Date LWEEKLY, WEEKLY__WEEKLyJ
(SAT) ..... (MON) (SUN)
Repeat step 3 to set:
• starttime,stoptime
• Channel(or LINEforoutsidesource)
• Speed(SP, LP, SLP)
End the program.
(_ Press PROG.
To Enter More Programs
PressA_Yand SET to select
and seta blankprogramnumber.
andthenrepeatsteps3 and4.
Exit this mode.
Press PROG twice.
• If you're using a cable box, make
sure that it is turned to the desired
channel and the power is left on for
timer recording,
• PROG TIMER indicator lights on
the unit.
1 PROG
5
3
2 SET
• 2 minutes before Timer recording is
performed, •PLEASE PREPARE FOR
TIMER REC" appears and/or the PROG
TIMER indicator flashes. Be sure e
cassette with record tab is loaded and the
"u_ le in Stop mode. •
• If the start times of two programs ovedap,
the lower numbered program will hove
priority.
• if the start time for a Timer Recording
comes up dudng a normal recording or
One Touch Recording (page 17), the
Timer Recording will not be performed,
• If there is a power interruption of more
than one minute, the recording may not
be performed or contiaue.
• If "INCOMPLETE" appears after all items
have been set, check all entries and make
necessary corrections.
To Next Page
Loading...
