Process of Recording
lConnection [z> _c> IProgramming J
Display MAIN MENU.
Press ACTtON,
Display SET UP CH
screen.
_1 1) Press AY'_"
to select =CH,"
2) Press SET to
display.
_l'Check list before you begin.
[] it isnecessaryto enter TV mode by
pressingDVD(--_TVbefore selecting
"GH"onthe MAIN MENU,
3
AKrk'M_ ; GAOLE
Nrro SET
Pfu_ 04 8_" UP
Select CABLE BOX
SET UP.
(_ 1) Press AY to
select.
2) Press SET
to display.
I=EI]U
4
_LI_ BOX SETUP
AREYOUUSfNGA P._BLEBOX?
m
Select "YES" or "NO".
1) Press A_ to
select "YES"
or =NO."
2) Press SET
to set.
Ifyouselect...
• "YES" '-'>Step 5.
• "NO" -.) Press ACTION ".) Go to VCR Plus+ Channel
Setup on page 24.
_ Select Cable Box output
channel number.
_ox=T up 1)Press AV to
_ _ _ _ [_ _ ,._ select.
" IT 2) Press SET toenter.
1ACTION
2SELECT
• AY<I_
.3
4.
5
2SET
5
• If necessary, refer to your cable
box manual.
• If you are using Audio/Video jack
connection for your cable box,
select and set "VIDEO OUT" as
the output channel.
VCR Plus+ and PlusCode are
registered trademarks of Gemstar
Development Corporation. The VCR
Plus+ system is manufactured under
license from Gemstar Development
Corporation.
23
To Next Page
Loading...
