Panasonic Omnivision PV-DM2799

1I %
2
Display MAIN MENU.
Press ACTION in stop
mode.
Display DVD screen.
(_I 1) Press
• ,_'4 • to
select.
2) Press SET.
Once initialsettings are done, they"remain in
memory (even after power off) untilchanged. This
means the unit willalways operate under the same
conditions (especially DVDs) each time.
3
D_)7_. i_UOIO OUTPUT
STILt. _ ;NJTO
W MODE : FmA 8_
Select the desired item. 1ACTION-
1) Press &Y
(_ tOselect. 5
2) Press SET.
DISC LANGUAGES (See below)
Alllanguagesofferedonthedisccanbeset.Ifthelanguageset is
notofferedOnthe disc,theodgi_ddisclanguagewillbeselected.
DIGITAL AUDIO OUTPUT (See page52.)
You canset the audiooutputthatcomesfromthe digital
audiooutput terminal.
STILL MODE {See page 53.)
To select"Field still"or"Framestilt"to preventjitteringfrom
occurringor to letsmalltextor finepattemsseencleadyin
thestiltpicturemode. When AUTO is set =FieldStill"or
"FrameStil?'isselectedautomatically.
"IV MODE (See page 53.)
Toselectwhetherthevideomatedalfora wide-screenwfllbeplayscl
beckinthePan&SeanstyleorintheLeiferbexstyleonthescreen.
To selectand satthe language ofthe audiosoundtrack,
subtitles,or tiUe/DVDmenus forall discsto be played.
4
Select the desired item.
_)"(_1 1) Press ,Y
to select.
2) Press SET
repeatedly
for language.
(Refer to
the right.)
%
Redisplay DVD menu
to continue setup.
Press ACTION and go to
step 3 to setup another
setting.
Or, to exit, press ACTION
three times.
2SELECT-
-2SET
"MENUS" selections
To select the language used in title menus or
DVD menus,
EnglishlFrenehlSpanish (factory preset: English)
OTHER $#_: Other language selection"
To enter OTHER _$:€ code number,
Press NUMBERED keys {Refer to the language
codes on page 56).
To make corrections, press_ repeatedly to
delete the language code number.
* if the selected language is not offered, the
original disc language is selected.
51
"SUB TITLE" selections
TO select the subtitle language,
AUTO: Same language selected for "AUDIO"
(Factory preset)
• If tanguage set for =AUDIO" is used in
playback, subtitles will not appear.
• If another language is used during
p_ayback,the subtitleswU(appo=inthe
language selected at the setup =AUDIO*.
English/French/Spanish
OTHER _=lk: Other language selection"
"AUDIO" selections
Toselect the audiosouodtracklanguage.
English/French/Spanish(factorypreset:English)
Oilglnaf: Odgthal disc language
OTHER _: Other languageselection*