L o Tape Operation
VHS Index Search System
Eachtime youstart a recording, an invisibleindex markis placed onthe tape. When timerrecordings are
made,programindexand programinformation(see =TimeStamp Feature"on page21) are alsoincluded.
Youcanthenusetheseindexmarksto accessorscanyour recordings.
1
mR
o[
REWIND FAST FORWARD
4 4
Direct Access Index Search
(For normal and/or timer recordings.)
This feature allowsyouto godirectlyto the recordingyouwantfrom
anywhereonthetape by enteringtheappropriateindexnumber.
1
Press INDEX in Playback or Stop
mode to display the INDEX screen.
• Thisscreenappearsonlyifthereare timer
recordingsontheProgramIndexlist.Ifthis
screendoesnotappear,go tostep3.
2 Press AT to select "INDEX
SEARCH," and then press
to display the INDEX screen.
3 Press a NUMBERED key to
select the desired recording.
• To calculatethe number,seebelow.
4
Press REW or FF to start a
reverse or forward search.
• When thedesignatedlocationis reached,
the CombinationVCR goesintoPlayback
mode.
I NDEX
PROGRAM INOEX SEARCH
SELECT:& • KEY
SET :i_ KEY
END : INDEX KEY
INDEX t
I NDEX 04
INDEX SEARCH 04 |
l
1
REWIND
4
2
3
FORWARD
4
To calculate the Index Number
Countforwardorbackwardeach recordingstartpoint,including
the recordingyouwantto see, from whereveryou are onthe tape.
Example 1:
If you are watching recording 4 and you want to watch recording 2, count the
start pointsto number 2. The totalis 3. Enter 3 in step "3"and press REW.
6
Example 2:
Ifyouare watchingrecording2 andyouwanttowatchrecording6, count
thestartpointsto number6.The totalis4. Enter4 in step=3"and pressFF.
NOTE: .Lindicates start points of each recording.
22
can memorizea totalof 8 programsin
Bprograms,thefirstprogramwillbe deletedandthe
To Next Page
Loading...
