_f'Check list beforeyou begin.
[] The clock is set tO correct time.
RECORD/TIME
!
2.
.4
a
c
2.
.3
VCR Lock Feature
When activated, this feature prohibits all
operations except for timer recording and
tape eject. This feature may be used to
keep young children from operating the
Combination VCR.
Hold down REC/TIME on the
Combination VCR without a
cassette inserted for 7 seconds
during Power On mode.
• I'NOCASSE-[-IEPLEASEINSERTA
CASSETI'E"isdisplayedwhen
REC/TIMEispressed,Pleasedisregard
this warning and continue to hold down
REC/TIME for 7 seconds... _
t ['
qT_GRLOCK ACTIVATED
VCR LOQ( OFF
To Cancel the VCR Lock feature,
with or without a cassette inserted,
hold down REC/TIME on the
Combination VCR for 7 seconds
againduringPower On mode.
• VCR Lock mode is cancelled
automatically after about 24 hours as
long as the clock is set.
Time Stamp Feature
Forabout the first10 secondsof each recording, the Combination VCR automatically
writes the following program data on the tape: Date, Start time, Scheduled stop time
(for Timer Rec. only), Channel No., and Category (for Timer Rec. only)• Then, if
playback is started at the startingpoint ofthe recording, this information willbe
displayed about 7 seconds after playback begins for a few seconds.
1Press ACTION to display the MAIN MENU.
2 Press &Y4• to select"VCR,"
and then press ACTION to display
the SET UP VCR screen.
3
Press &_l' to select"TIME STAMP," and ......
then press • to select "ON" or "OFF."
• When =OFF" is selected, the program data is
written on the tape, but will not be displayed
for the first 5 seconds of playback.
MAIN ME_MU
SET UP VCR ......
REPEAT PLAy :ON
BEEPER :OFF
NOISY CH BLUE BACK:ON
SELECT:A • KEY
SET :_" KEY
END :ACTION KEY
4 Press ACTION twice to return to the normal screen.
<Time Stamp Example >
Normal/One Touch Recording
1212811998 MON
12:00PM
CH 08 ABC
Timer Recording When Clock is notset•.•
1212a/1_ _o. [ --/-_-j ....
12:06PM -- I:OOPM I
c.oaJ=cs_rs _;_; _ac
• If the tape speed is changed immediately after recording begins, the
display may be incorrect•
Blue Back ON/OFF Feature
You may choose whether or not you want the Combination VCR to display
a solid blue back screen when the broadcast signal is very weak or the
playback signal is not present.
i
A Follow steps 1-2 in the above section.
D Press &,_' to select "NOISY CH [...... SETuPVCB...... |
BLUE BACK," and then press 'i REPEATmY :ON '/
• When "ON" is selected, a solid blue screen I SELECT:&• KEY |
appears whenever the signal is weak or I SET :,- KEY I
nonexistent• When "OFF" is selected, the ( END :ACnON_Y j
picture is displayed regardless of the signal condition•
• The picture cannot always be seen clearly when OFF is selected.
C Press ACTION twice to return to the now:mdlscreen.
Warning Beeper Feature
WhenyouselectBEEPERON, a shortwamingwillsoundeachtimean
invalidentryorincompleteoperationis made.
a Follow steps 1-2 in the above section.
t,
bPress A_' to select "BEEPER." and _ uPvc.......
then press • to select "ON" or "OFF."
C Press ACTION twice to exitthis S,.BCT:,•
:). KEY
screen. _o :.cr,o.KEY
REPEAT PLAY iqN
NOISY CH BLUE BACK:ON
TIME STAMP :OFF
21
To Next Page
Loading...
