T_[LIJJ._.JJLI.J LI]..ejjLII.Le.,_ LiLt-,_;.jll.Ijj.t-_ &_,e'J,SL_J LLe,_t._eJLW'J,.eJILIL;.J,e'JL_,.eJJIL_"J
The Remote Control can be set to control some TV functions.
1 Find your TV Brand Code Number from those shown below.
2 setupfor TV control,
-_- hold down TV button,
-_- enter code with NUMBER keys.
3 Confirm code entry,
_.- press POWER to turn your TV on or off.
• See table below for controllable functions in each mode.
• Repeat setup after remote battery reptacement.
• Remote will not control every TV made by the manufacturer listed, if you get no
response, your partbular unit cannot be controlled. There are NO additional codes for
the products licted, if your product is not listed, then the remote is not compatible with
that product.
If your TV has AUDIO IN and VIDEO IN terminals, you can connect your VCR
to them to receive higher quality picture and sound.
VCR
IN FROM ANT
TV
_VHF_HF
VIDEO IN
tl_11+[,+i =++rll Illl :tEltl_ lkPiTil IT_ i
After remote is set up, you can select VCR or TV for the desired function.
Press VCR or TV on the remote.
(Table below shows available unit buttons for each mode.)
t VCR TV
VCR All VOL UP/DOWN
VCRjTV, PLAY, STOP, EJECT, SAP/Hi-Fi, DISPLAY, POWER, INPUT, ENTER,
TV FF, REW, PAUSE/SLOW, REC, NUMBER keys, CH UP/DOWN
SPEED, CMiZERO, RESET COUNTER, TAPE POSITION VOL UP/DOWN
(_ Connect the VCR's VIDEO OUT jack to the TV's VIDEO IN jack.
(_ Connect VCR's LiR AUDIO OUT jacks to the TV's L/R AUDIO IN jacks.
Set the VIDEO/TV selector of your TV (Monitor/Receiver) to "VIDEO."
• Not all functions listed may be controllable.
• in TV mode, it may be necessary to press ENTER after pressing NUMBER keys for channel
selection.
IIIITII;I f;,11itii1'_ [:',_lli_llIll1l[_.]i[
I
Panasonic ....................... 01,02
Quasar ............................ 01,02
RCA ...................................... 03
GE ......................................... 03
Zenith .................................... 04
Magnavox .............................. 05
Sylvania ................................. 05
Sharp ............................... 06, 07
Sony ...................................... 08
Toshiba ................................. 09
Sanyo .................................... 10
Fisher .................................... 10
JVC ....................................... 11
Hitachi ................................... 12
MitSubishi ........................ 07, 13
Samsung ............................... 14
Gold Star ................... 15,18, 17
• Some manufacturers use severai codes for one brand. If the first code entered fails, try the next one
listed.
• Some Tv' brands require you to turn on the power manually.
• With a Cable Box (VCR =1_Cable Box)
TV
BOX
VCR
• Connect With Two Cable Boxes
VCR
CABLE BOX
_[_
• view any
(including
scrambled)
channel.
• use VCR
Remote
Control to
select
channels
without using
Multi-brand
control feature.
• record and
view both
scrambled and
unscrambled
channels if
additional
TV equipment is
added. This
connection
requires: two
convetta_
boxes, an AfB
switch, and a
2-way eqfitler.
record
scrambled
channels.
view a
channel
other than
the one
selected for
any type of
recording.
do a Timer
recording of
a channel
unless you
select it at
the cable
box.
To Next Page
Loading...
Need help?
General