Use when moving VCR to new location, or if a mistake was
made in the One Time VCR Setup section.
• Make sure a tape is not inserted in the VCR.
Break off the tab.
I
1Turn VCR
Power on.
Press and hold both PLAY
and CHANNEL • on the VCR
for more than 5 seconds.
• The power willshutoff.
3 Do "One Time VCR Setup" steps on page 6.
VCR auto adjusts clock for DST. (Page 7.)
Tab
Screw driver
To record again
Cover the hole
with cellophanetape.
Spring (First Sunday in April)
DST:ON --> sets clockahead one hour.
I NORMAL TIME _a.m.
DAYLIGHT ] _
SAVING TIME 3:0-0a.m. 4:O0 a.m. "
Autumn (Last Sunday in October)
DST:ON --> Turnsclock back one hour,
DAYLIGHT _ a,m,
SAVING TIME
Only use tapes with the _ mark in this unit.
Tape Speed
Setting
SP
(Standard Play)
LP i
(LOngSLpPlay)_ __
(SuperLongPlay) I
I
Type of Video Cassette
T60 T120 T160
i 2 Hours
1 Hour 2 Hours 40 Minutes
2 Hours 4 Hours 5 Hours
20 Minutes
3 Hours 6 Hours 8 Hours
]
NORMAL TIME
/ ; :
J
1:00 a.m. 2:00 a.m.
• If your area does not observe Daylight Saving
Time, select DST:OFF.
• Keep these time changes in mind when
programming the VCR for timer recordings.
28
To Next Page
Loading...
