EasyManua.ls Logo

Panasonic Omnivision VHS PV-9405S - Page 29

Panasonic Omnivision VHS PV-9405S
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Playing older or damaged tapes may eventually
cause video heads to become clogged.
Video Head Clog Sensor
During playback this r
screen appears if
L
cloggingisdetected. NEEDVIDEOCLEANINGHEADS MAy
To remove screen, PLEASEINSERTHEAD
CLEANING CASSETTE
press PLAY on the ORREFERTOMANUAL
remote or VCR.
END:pLAy KEY
Use "dry" type head cleaning cassette only.
(Part No. NV-TCL30PT is recommended.)
Follow cleaning tape instructions carefully.
Excessiveuse of tape can shorten head life.
If head clog symptoms persist, contact your
nearest Factory Service Center or authorized
Service Center.
Power Source:
Power Consumption:
Video Signal:
VideoRecordingSystem:
Audio Track:
Tuner:
Broadcast Channels:
CABLE Channels:
120V AC, 60 Hz
Power On
Approx. 18 watts
P_wer Off
Approx. 3.3 watts
EIA Standard NTSC color
4 rotary heads helical
scanning system
1 track (Normal)
VHF 2-13, UHF 14-69
Midband A through I (14-22)
Superband J through W (23-36)
Hyperband AA-EEE (37-64)
Lowband A-5-A-1 (95-99)
Special CABLE channel 5A (01)
Ultraband 65-94, 100-125
Operating Tempersture:41°F-104°F (5°C-40°C)
Operating Humidity: 10%-75%
Weight: 7.7 Ibs. (3.5 kg)
Dimensions: 14-15/16" (W) x 3-2/3" (H) x
12-3/16" (D)
380 (W) x 93 (H) x 310 (D) mm
Note: Designs and specificationsare subjectto change
withoutnotice.
A cleanvideo head helps producea clear picture.
So, we have equipped your VCR with a built-
in, non chemical head cleaning system that
helps prevent clogging of the video heads.
Cleaning is performed each time you load or
unload a video cassette.
This feature is preventative only, If your video
heads are seriously dogged, consider the use of
a chemical nonabrasive head cleaning kit or take
your VCR to a Service Center.
Use a soft cloth or dusting attachment of
your vacuum cleaner to dust your VCR.
Remove dust from the ventilation holes on
the back sides and bottom of the cabinet.
Plastic surfaces are easily scratched and
can be marred by alcohol and various
solvents. Avoid excessive use of oil-based
furniture polishes since the materials used
in the cabinet will accumulate more dust.
We recommend using a nonabrasive,
antistatic cleaner and polisher.
Dioital Auto Picture
Automaticallycontrolsthe video outputsignalfor
less noisedepending on the tape condition.
DIoital Auto Trackina
Continuouslyanalyzes the signaland adjustsfor
optimumpicture quality.
Manual Trackina Control tto reduce oicture noise)
Use duringPlayback and Slow Motion mode
to reduce picture noise.To returnto Auto Tracking,
press POWER off, then on again.
V-Lock Control fto reduce oicture !itter)
In Still mode, CH (TRACKING) _ operate as
a V-Lock control.
29

Related product manuals