Congratulations
on your purchase of one of the most sophisticated and
reliable products on the market today. Used properly,
it will bring you and your family years of enjoyment.
Ptease lilt in the information below. The serial number
is on the tag located on the back of your VCR.
• Date of Purchase
• Dealer PurchasedFrom
• Dealer Address
• Dealer Phone No.
• Model No, PV-9405S
• Serial No
[] Remote Control [] Batteries 2 "AA"
VSQS1597
[] RF Coaxial Cable
VJAS0196
Open the cover.
Insert the
batteries as
marked.
,,, _'-;, (See page 5)
f
CABLE "IV
OUTDOOR ANTENNA INDOOR ANTENNA
or
j
VCR
lJ
Disconnect antenna
or cable from TV and
connect to VCR.
IN FROM/ANT
OUT TO TV
3 ch 4 --
Set VCR Output to
channel 3 or 4 (not
an active station).
,>
2
Connect VCR
to TV with RF
Coaxial Cable,
VHF/UHF
3) Close the cover.
[] Battery replacement caution
• DO not mix old and new batteries.
• Do not mix alkaline with manganese batteries.
4
TV
Tune TV to VCR output channel
the same one you set in step 3.
WARNING
When using "Nut type" RF coaxiat cables, tighten with
fingers only. Overtightening may damage terminals.
To Next Page
Loading...
