Panasonic Omnivision VHS PV-9405S - Page 5

1
F
Between ANT. and VCR
• Case 1: Twin Lead Cable Only
To VCR Terminal
(Flat) Twin Lead Transformer
300 Ohm Cable (notsupplied)
• Case 2: Twin Lead & Coaxial Cables
UHFNHF Band Mixer
(notsupplied)
(Round) 75 Ohm
coaxial Cable
To VCR Terminal
• Case 3: Two Twin Lead Cables
:__UHF/VHF Band Mixer_
3oo-_5o_m It_
Transformer
(not supplied) TOVCR Terminal
• If your TV has both post and plug-type
VHF terminals, the post connection is
recommended to minimize signal loss.
Between VCR and TV
/-
• Case 1: Screw & Plug Type Terminal
UHF/VHF Band _ TV
Separator
(not su__,_(_- VHF
RF Coaxial Cable
• Case 2: Screw Type Terminal
TV
75-300 ohm
Transformer I .,_ |
(nota_,_ I___l_Vo.rF
• Case 3: Double Screw Type Terminal
UHFNHF Band TV
Separator
(not sup_ VHF
• Case 4: Complex TV Terminal
TERMINALSONBACKOF TV SET
s0,out-
ANT2
• Connect to one of the ANT terminals and
select the same antenna number on the TV.
J
5