4.1.10. HOW TO REMOVE A JAMMED TAPE
CAUTION:
Wiper Arm Unit may be damaged or its spring may be out of place when
the jammed tape is removed by force.
Remove a jammed tape as follows:
4.1.10.1. Manual Method
When a tape jam is encountered, check the tape loading condition and use the following procedure to
remove a tape jam.
Fig. 7-1
Method -1:
1. Move the Pinch Roller Unit out by unhooking the Pin of Pinch Arm Unit
so that the Pinch Roller is separated from the Capstan Rotor Unit shaft.
Fig. 7-2
13
To Next Page
Loading...
