is in the upward position as shown.
Fig. J3-2
2. Confirmation/Alignment of Intermediate Gear B, Main Cam Gear, and
Intermediate Gear A
A. Confirm that the Hole A on Lift Gear is a Through Hole with a hole
on chassis.
B. Confirm that the hole on Intermediate Gear A is aligned with the
hole on Lift Gear.
Fig. J3-3
C. Install the Intermediate Gear B so that the hole on the Intermediate
Gear B is aligned with the hole on the Main Cam Gear.
Fig. J3-4
25
To Next Page
Loading...
