For Model PV-V4522 only
1 Press SAP/Hi-Fi to display audio mode.
(Display disappears after 5 seconds.)
Press SAP/Hi-Fi repeatedly
to select desired mode.
• Refer to =Receivable
Broadcast Types" on page 4.
• Arrow indicates selection.
3 Doa recording.
See p. 5 of =Basic Operations" Instruction book.
1Start playback.
See p. 5 of =Basic Operations" Instruction book.
2 Press SAP/Hi-Fi to display audiomode.
(Displaydisappearsafter 5 seconds.)
3
[ H_F_;IJR '1
HIR;L
HIF_:R
NORV_L
•Arrow indicates
selection.
Press SAP/Hi-Fi repeatedly
to select desired mode.
• Select =HIFI(L/R)" or
=HIFI(L)" or =HIFI(R)" to
listen to stereo recordings in
stereo sound.
Select =NORMAL" for
monaural sound.
O
• Only tapes recorded in Hi-Fi stereo will playback with true stereo sound.
Standard stereo tapes will playback in monaural sound.
• To listen to Hi-Fi stereo playback, the VCR AUDIO (L/R) jacks must be connected to
a stereo "iV or an external stereo amp and speakers. (See page 4.)
• If tracking is adjusted dudng playback, Hi-Fi audio may revert to normal audio.
• Hi-Fi and normal audio playback volume level may differ.
*Important: if a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.
-5-
To Next Page
Loading...
