Panasonic OneHome BB-HCM581A

To Next Page

HomeLogic LLC ●

100 Hoods Lane

●

Marblehead, MA 09145

●

Phone (781) 639-5155

●

Fax (781) 639-9677

OneHome™

Management and Control Solutions

Camera Integration Note

Manufacturer: Panasonic

Model Number(s): BB-HCM580A/581A

Comments: OneHome version 4.0.1310 or newer, Network Camera (version 3.10)

Document Revision Date: 5/19/2011

NOTE: This document refers to Camera setup in software versions below 5.2 ONLY.

Please see the Rev 5.2 Integration Note for systems running 5.2 or greater.

VERVIEW AND SUPPORTED FEATURES

BB-HCM580/581A’

S SUPPORT THE FOLLOWING FEATURES

Pan / Tilt / Zoom: The camera can be turned to see various locations and zoom in and out.

Presets: These cameras support presets, allowing the user to store predefined locations such as a

driveway or pool. This feature requires OneHome software version 4.0 or later.

Motion Detection: These cameras support motion detection to trigger events in the OneHome system.

Video Out: The camera includes an analog video output, which can be connected to an analog DVR to

provide separate recording, or to a TV modulator to enable camera viewing on a television.

Image Flip: The camera can be mounted with its base up or down, and the image will appear normal.

HESE

AMERAS

NOT

SUPPORT THE FOLLOWING FEATURES

Input/Output: These cameras include an I/O connector for sensor inputs and alarm outputs. These are

not supported by the OneHome system at this time.

Need help?

Do you have a question about the Panasonic OneHome BB-HCM581A and is the answer not in the manual?

This document describes the Panasonic BB-HCM580A/581A network camera, focusing on its integration with the OneHome™ system.

Function Description:

The Panasonic BB-HCM580A/581A is a network camera designed for surveillance and monitoring. It can be integrated into the OneHome™ system, allowing for remote viewing and management. The camera supports various resolutions and zoom levels, making it suitable for different monitoring needs. It can be configured to operate in either a single or multi-camera setup.

Important Technical Specifications:

Model Number: BB-HCM580A/581A
Manufacturer: Panasonic
Network Connectivity: The camera connects to a network via Ethernet (Cat5 cabling) and supports both IPv4 and IPv6. It can be configured for automatic setup (DHCP) or assigned a static IP address.
Port Number: Default port is 80.
Resolution: Supports various resolutions, including 192.168.0.80 as a default IP address for the first camera.
User Management: Supports multiple user accounts with different access levels (Administrator, General User).
Motion Detection: Features motion detection with adjustable sensitivity and threshold settings.
Buffering: Includes buffered image functionality.
External Output: Supports external output.
Analog Video Output: Provides analog video output, which can be connected to an analog DVR or TV.
Image Flip: The camera image can be mounted both upright and upside down, and the image will appear normal.
Input/Output: Supports an I/O connector for sensor inputs and alarm outputs.

Usage Features:

Installation: The installation process involves physically installing the cameras, connecting them to the network, and then configuring them using the Panasonic EasyConfig.exe software.
Camera Setup: The setup process includes searching for cameras on the network, authenticating with a username and password (default username is "Administrator" and password is "password"), and then configuring network settings.
Network Configuration: Users can choose between "Automatic Setup" (DHCP) or "Static" IP address assignment. For static IP, the document recommends setting the first camera to 192.168.0.80 and the second to 192.168.0.81, with a subnet mask of 255.255.255.0 and a default gateway of 192.168.0.82. DNS settings are also configurable (e.g., Primary Server Address 4.2.2.2, Secondary Server Address 192.168.0.89).
UPnP (Universal Plug and Play): The camera supports UPnP for automatic port forwarding, which can be enabled or disabled.
User Management: The system allows for the creation and modification of user accounts with different access levels. The "Administrator" account has full control, while "General User" accounts can be configured with specific viewing and control permissions (e.g., Level 1 for camera viewing only, Level 2 for camera viewing and preset control, Level 3 for camera viewing and all controls).
Motion Detection: Users can enable and configure motion detection settings, including sensitivity and threshold. This feature allows the camera to trigger events or notifications based on detected movement.
Pan/Tilt/Zoom (PTZ): The camera supports pan, tilt, and zoom functions, allowing users to adjust the camera's view remotely.
Focus: Manual focus adjustment is available.
White Balance: Automatic white balance adjustment.
Click to Center: A feature to quickly center the camera's view.
Blacklight: Blacklight compensation.
Talk: Supports two-way audio communication (if equipped).
Preset Management: Users can define and save preset camera positions for quick recall.
Recording: The camera can be configured to record video, with options for resolution and storage.
Proxy Server Settings: If a proxy server is used, its address, port number, login ID, and password can be configured.
Time and Date: The camera's internal clock can be set for accurate timestamping of recordings and events.

Maintenance Features:

Firmware Updates: The system supports firmware updates to ensure the camera operates with the latest features and security enhancements.
Password Management: Users can change their passwords for security. The system recommends strong passwords (8-15 characters, including uppercase, lowercase, numbers, and symbols).
Reset to Factory Settings: The camera can be reset to its factory default settings if needed.
Troubleshooting: The document provides guidance on common issues, such as ensuring proper network connectivity and verifying IP addresses.
Documentation: The OneHome™ system provides a DVR Integration Note for detailed information on setting up the DVR tab. The Homelogic Configurator provides further details on camera settings.