Before using
24
LSQT1091
Switching the language
You can switch the language on the screen
display or the menu screen.
1
Set [LANGUAGE] >> select the desired
language.
Using the menu screen
For each individual menu, please refer to -63-.
1
Press the [MENU] button.
≥The menu corresponding to the mode
selected by the mode dial is displayed.
≥Do not switch the mode dial when the menu is
displayed.
2
Move the joystick up or down in order to
select the top menu.
3
Move the joystick right or press it to set the
selection.
4
Move the joystick up or down in order to
select the sub-menu.
5
Move the joystick right or press it to set the
selection.
6
Move the joystick up or down in order to
select the item to be set.
7
Press the joystick to determine the setting.
ª
To exit the menu screen
Press the [MENU] button.
ª
To get back to the previous screen
Move the joystick left.
ª
About the menu setting
≥The menu is not displayed while recording on a
tape or a card. Also, you cannot record on a
tape or a card while the menu is displayed.
MENU
LSQT1091_ENG.book 24 ページ ２００６年１１月２７日 月曜日 午後１時１７分
To Next Page
Loading...
