Before you begin...
• Turn ON both units.
• Set the recording VCR's Input Signal
Selector to LINE.
• Set the Palmcorder POWER switch to VCR.
• Please refer to page 20 for S-VHS connection.
Connection
n
TV VHF Connecting Cable
(To m°nit°r)_ll (not supplied)
Recording:
VCR
i ITop View I _.
Audio/Video Cabletlc_v_ _ _ _ _1
__lmcorder 4.
,0eoou,
'
DO Input
Connector
DC Power
Cable
DC 0
Connector To AC Outlet
1
Insert a pre-recorded tape
into the source (playing) Paimcorder al=d a
blank tape with record tab into the editing
(recording) unit.
Press PLAY on the (playing) Palmcorder.
Press STILL when the tape reaches the
point you want to start dubbing.
+
Press PLAY and REC together then
immediately press STILL on the
recording unit.
STILL
5 +m
Press STILL on the playing Palmcorder
and PAUSE/STILL on the recording unit to
begin copying your tape.
STOP
Press STOP on both units when dubbing
is complete.
• Turn the TV ON and select its VCR
channel (either CH3 or CH4).
• Set the VCR/TV Selector on the
recording VCR to VCR.
- CAUTION:.
Unauthorized exchanging and/or copying of/
copyrighted recordings may be copyright
1
infringement.
35
To Next Page
Loading...
