18
LSQT0969
Before using
Parts identification and handling
You can record the image while viewing it on the LCD monitor.
1 Press the PUSH OPEN button. The LCD
monitor opens slightly.
Pull the LCD monitor out in the direction of
the arrow.
≥ The viewfinder is now deactivated.
≥ It can open up to 90o.
2 Adjust the angle of the LCD monitor according to your preference.
≥ It can rotate up to 180o A towards the lens or 90o B towards the viewfinder.
≥ The brightness and color level of the LCD monitor
can be adjusted from the menu. (l 39)
≥ If it is forcibly opened or rotated, the unit may be
damaged or fail.
≥ When the LCD monitor is rotated by 180o towards
the lens (when recording yourself), the LCD monitor
and the viewfinder will be simultaneously activated.
Pull out the viewfinder.
(l 39, Adjusting viewfinder)
Using the LCD monitor
PUSH
OPEN
BA
Using the viewfinder
D200(P_PC)eng.book 18 ページ ２００６年１月１８日 水曜日 午後５時４６分
To Next Page
Loading...
