Chapter 6 Using Linker
112 Instruction RAM Support
The starting address in instruction RAM is given in hexadecimal.
ld103 -T @CODE=80000000 main.rf sub.rf -OVL 1:@CODE=40000000
seg1.rf
-OVL 2:@CODE=40000000 seg2.rf
ld103 -T @CODE=80000000 main.rf sub.rf -OVL
1:_TEXT,_CONST=40000000
seg1.rf -OVL 2:_TEXT,_CONST=40000000 seg2.rf
ld103 -T @CODE=80000000 main.rf sub.rf -OVL
1:_TEXT@CODE=40000000
seg1.rf -OVL 2:_TEXT@CODE=40000000 seg2.rf
Default specification
If there are no OVL options, the instruction RAM function is not used, and linking proceeds in the
normal fashion.
To Next Page
Loading...
