Chapter 5 Using Asssembler
80 Command Options
5.3.5 Other Options
Functional Description
This option displays assembler command options and their descriptions to the screen.
The -j, -Je, -Js, -Jj, and -e options, if they appear, control the language and the coding scheme used to
display this information.
Rules of Use
To specify the option, enter the hyphen (-) followed by the lower case letter 'h'.
as103 -h
NOTE: Even if the h option is not specified, input of AS103 alone will also display the
help screen. When displaying help information, version number is also displayed
on the screen.
Default Specification
Help information will not be displayed to the screen.
Functional Description
This option displays the assembler's version number on the console.
Rules of Use
To specify the option, enter the hyphen (-) followed by the lower case letter 'v'.
as103 -v
Default Specification
The default is to not display the version number.
NOTE: Even if the v option is not specified, input of as103 alone will also display the
help screen. When displaying help information, version number is also displayed
on the screen.
h Display listing of available assembler option on the console
v Display the assembler's version number on the console
To Next Page
Loading...
