Panasonic PP105168

9
Preparation
First time power on
1
Turn the key in the ignition until the ac-
cessory indicator lights.
2
Press [POWER].
Clock Display Setting
1
Hold down [DISP](CLOCK) for more than
2 seconds to adjust clock setting.
2
Press [SEL] to open the clock display
setting display.
3
Press [d] or [s] to adjust.
the 24-hour system used (default)
cd
the 12-hour system used
4
Press [SEL] to determine the setting.
Notes:
¡ If no operation takes place for more than 5
seconds in the clock display setting, the display
returns to the regular mode.
¡ To exit from the clock display setting, press
[DISP].
Clock adjustment
*The 12-hour system is used for example.
1
Press [DISP](CLOCK).
(Clock display)
2
Hold down [DISP](CLOCK) for more than
2 seconds.
*Indicator for AM or PM time
Hour blinks
3
Adjust the hour.
[d] : Sets ahead.
[s] : Sets back.
Hour entered
4
Press [DISP](CLOCK).
Minute blinks
5
Adjust the minute.
[d] : Sets ahead.
[s] : Sets back.
Minute entered
6
Press [DISP](CLOCK).
Completed
Notes:
¡ Clock time is displayed when the unit is power off.
¡ “CLOCK ADJUST” is displayed when the clock is
not adjusted.
¡ Hold down [d] or [s] to change numbers
rapidly.
¡ When you want to readjust the time, repeat steps
2 to 6.