Panasonic ProLine AG-2570 - Setting the Clock of Your VCR

17
Setting Up
Setting the Clock of your VCR
The built-in digital clock is used to activate the
timer for automatic recording and must be set
to the correct time. It employs the 24-hour
system.
Preparations
– Confirm that the TV is on and the VCR
viewing channel is selected.
– Turn on the VCR.
– Press [VCR/TV] to select the VCR mode.
Example:
Date; 16 October (During daylight saving
time), 2005
Time; 20:15
VCR
AV
INPUT SELECT VCR/TV
RESET OSD/DISPLAY
PICTURE MODE REC
TIMER
Á
NAVI
PROG/CHECK SPEED
s
X
W
X
SEARCH
CANCEL
INDEX
OK
AUDIO
∫
1
3
4
2 1
56
9¥:
Í
;/D
MENU
1 2 3 4
4 Set each item by pressing 3 or 4 and 1.
Press 2 to return to the previous item.
Set [Year] to [2005].
Set [Month] to [10].
Set [Date] to [16].
Set [Time] to [20:15].
– When it is kept
pressed, the indication
changes in 30-minute
steps.
– There is no need to
press 1.
≥LANGUAGE
SELECT
END
: , OK
:MENU
OSD MENU
LANGUAGE
SELECT
END
: , OK
:MENU
OSD MENU
CHANNEL SET
OPTION
≥CLOCK SET
CLOCK SET
CHANNEL SET
OPTION
M
1
Y
2005
D
1
H:M
0:00
CLOCK SET
START :MENU
SELECT: ∂/µ:
D. S. T. : YES ¡NO
D. S. T. : YES ≥NO
Y
2005
CLOCK SET
M
10
D
16
H:M
20:15
START :MENU
SELECT: s/r:
D. S. T. : YES ≥NO
Y
2005
H:M
0:00
CLOCK SET
M
10
D
16
START :MENU
SELECT: s/r:
D. S. T. : YES ≥NO
M
10
Y
2005
D
1
H:M
0:00
CLOCK SET
START :MENU
SELECT: s/r:
D. S. T. : YES ¡NO
M
1
Y
2005
D
1
H:M
0:00
CLOCK SET
START :MENU
SELECT: s/r:
5 Press [MENU].
– The clock starts.
Note:
– The clock operates for at least 5 years on its
backup system in the event of a power
failure.
Time Reset Function
If the clock is less than two minutes slow or
fast, it can easily be reset to the proper time.
Example: Resetting the clock to 12:00.00
1 Select [CLOCK SET] from the OSD menu
and press [OK].
2 When the current clock display on the VCR
is between 11:58.00 and 12:01.59, press
[MENU] as soon as you hear the 12:00.00
signal. This resets the time to 12:00.00.
Operations
1 Press [MENU].
2 Select [CLOCK SET] by
pressing 3 or 4 and
then press [OK].
3 Set [D.S.T.] (Daylight
Saving Time) by
pressing 3 or 4.
– Select [YES] to set daylight saving time.
The time on the clock is advanced by
1 hour.
– Select [NO] to return to standard time. The
time on the clock is set back by 1 hour.
– Press 1 to set each time.
– Press [MENU] when not setting each time.