To Next PageTo Next PageWhat to do if Panasonic Projection TV says to replace the lamp?
If the Panasonic Projection TV displays a message instructing you to replace the lamp and the LAMP indicator is lit red, you should replace the lamp with a new one.
Why is my Panasonic PT-43LC14 remote not working?
If the remote control for your Panasonic Projection TV isn't working, check the following: * Ensure the batteries aren't dead and are inserted correctly. * Make sure the remote control sensor isn't exposed to direct light from fluorescent lamps or other strong light sources. * Verify that you've correctly set the remote control code.
How to fix a blurry picture on a Panasonic PT-43LC14?
If the image on your Panasonic Projection TV is not clear, ensure the antenna cable is properly connected. Also, sudden changes in ambient temperature may cause condensation in the internal optics, but this should disappear after the power has been on for a while.
What to do if Panasonic PT-43LC14 TEMP indicator flashes?
If the power of your Panasonic Projection TV turns off and the TEMP indicator flashes 2 or 4 times every 5 seconds, check whether the vents are clogged. If the set is being used in a location that is hot, this can also cause the power to turn off.
General| Brand | Panasonic |
|---|---|
| Model | PT-43LC14 |
| Category | Projection TV |
| Language | English |
Introduces the operating instructions and lists model numbers for the projection display.
Provides contact information for support and details on product registration benefits.
Covers critical warnings and precautions for safe operation, electrical safety, and installation.
Outlines FCC rules for digital devices and the declaration of conformity.
Guides on receiver location, viewing position, optional equipment, and initial safety precautions.
Identifies and explains the functions of buttons on the remote control and display unit.
Provides general connection advice and guides on connecting antennas via RF IN terminals.
Illustrates connecting VCRs, DVDs, Component Video, RGB, and HDMI sources.
Details connecting to cable TV systems and using AV OUT terminals for recording or output.
Explains power operations, initial setup, and navigating the on-screen menus.
Covers automatic/manual channel tuning, basic viewing, aspect controls, and searching channels.
Details playing external equipment, mute, freeze, SAP, and split screen functions.
Details adjusting screen position/size, audio modes, and fine-tuning picture settings.
Explains program blocking, ratings, closed captions, and labeling video inputs.
Details using the photo viewer for displaying images from SD/PC cards, including single play and slide show modes.
Provides instructions for lamp replacement and explains the meaning of unit warning indicators.
Guides on programming the remote, referencing codes, and troubleshooting common issues.
Details technical specifications, cleaning advice, service contacts, and warranty information.
